Dynamic Analysis and Control of a Quarter-Car Suspension
سه سال پیش منتشر شده
تعداد بازدید: 209
کد پروژه: 205077
شرح پروژه
Maximum 5000 words for the assignment
Background
The suspension system supports the vehicle, allowing the wheels to move up and down over irregularities in the road. It cushions the ride for the frame, engine, transmission, and passengers, while keeping the tires in firm contact with the road under all conditions. Suspension system parts include springs, damping devices (shock absorbers), ball joints, steering knuckles, and spindles or axles. Two types of front suspension systems are widely used in today's vehicles: the MacPherson strut suspension and the short/long arm (SLA) suspension. A sound suspension design is based on proper suspension modelling and simulation.
You will be provided with some typical data ranges for one-degree-freedom suspension and two-degree-freedom suspension, including the mass, spring and dampers. You are also be given some PID controller parameters. You will need to find any additional figures you need by research or calculations. The design criteria is deliberately open, it is up to you how you model the system in Matlab/simulink and Adams/view. Simulations should be validated with hand calculations where possible.
این پروژه شامل 1 فایل مهم است، لطفا قبل از ارسال پیشنهاد حتما نسبت به بررسی این فایل اقدام فرمایید.
مهارت ها و تخصص های مورد نیاز
بودجه
300,000 تومان تا 750,000 تومان
مهلت برای انجام
7روز
وضعیت مناقصه
بسته
درباره کارفرما
عضویت چهار سال پیش
