از پارسکدرز بیشترین بهره را ببرید و رویای کاری خود را زندگی کنید.
شش سال پیش منتشر شده
تعداد بازدید: 217
کد پروژه: 164004
شرح پروژه
سلام و عرض ادب.
یه مقاله هست رشته شیمی تجزیه که ریوازاش از ژورنال اوندن باید اصلاح بشن. میفرستم خدمتتون در صورت امکان برای انجام کار ممنون میشم اطلاع بدین🙏🌸🙏
Ref.: Ms. No. ESPR-D-20-07862
Performance of Modified γ-MnO2/Chitosan/Fe3O4 Nanocomposite As Efficient Adsorbent for Simultaneous Elimination of Zinc (II) and Lead (II) Ions from Aqueous Systems
Environmental Science and Pollution Research
Dear Dr .........
Reviewers have now commented on your paper. You will see that there are a number of issues that need to be addressed before the paper can be accepted for publication by ESPR.
Please include continuous line numbers in your manuscript to facilitate editorial handling and reviewing.
We ask that you give the comments raised by the referees your careful consideration and that you submit a revised version of your manuscript as well as an itemized reply to each of the reviewers' comments. Please make sure to submit your editable source files (i. e. Word, TeX)
Your revision is due by 07 Sep 2020.
If you decide to revise the work, please submit a list of changes or a rebuttal against each point which is being raised when you submit the revised manuscript.
If you need extra time to revise your manuscript, please contact Mrs. Berbon + joanne.berbon@springernature.com
To submit a revision, go to https://www.editorialmanager.com/espr/ and log in as an Author. You will see a menu item called 'Submissions Needing Revision'. You will find your submission record there.
I am looking forward to receiving you revised manuscript!
Yours sincerely,
Prof. Tito Roberto Cadaval Jr
Editor
Environmental Science and Pollution Research
Reviewers' comments:
Reviewer #1: I read manuscript with interest entitled " Performance of Modified γ-MnO2/Chitosan/Fe3O4 Nanocomposite As Efficient Adsorbent for Simultaneous Elimination of Zinc (II) and Lead (II) Ions from Aqueous Systems". Overall, this is a clear, concise, and very well-written manuscript. The authors make a systematic contribution to the research literature in this area of investigation. The introduction is relevant, and theory based. Sufficient information about the previous study findings is presented for readers to follow the present study rationale and procedures. The methods are generally appropriate. Overall, the results are clear, and the data well understood and modeled in detail and has environmental implications. In my opinion, the manuscript is suitable for publication in "ESPR", after the authors have addressed the following comments and questions:
Please revise your title, if possible.
What is the pollutant equilibrium concentration?
Please revise your last key words
Authors have used isotherm and models, which thing showed better results in current study?
There are several latest studies on modification for heavy metals adsorption, please use some latest references above 2015. e.g., Environmental Science and Pollution Research 25 (12), 11875-11883; Journal of Soils and Sediments 18 (9), 2948-2959.
Please explore your novelty statements in your introduction section.
Could you please tell at what pH level EDTA was dissolved in distilled water?
Authors have used kinetic models pseudo in current study, please provide relevant equations in M&M section.
Authors have measured point of zero charge, if possible measure Zeta potential also at varying p levels.
Please revise all figures.
Reviewer #2:
In this manuscript, a novel γ-MnO2/Chitosan/Fe3O4 nanocomposite was synthesized and modified by Ethylene Diamine Tetra Acetic Acid (EDTA) for separate and simultaneous adsorption of Zn(II) and Pb(II) ions from aqueous solutions in a batch system. Some properties of the adsorbents were characterized and series of adsorption studies were done to evaluate the performance of adsorbents. There are several points need further description before this paper can be accepted for publication:
1. The appropriate references should be cited for all equations used in this work.
2. Please use updated references in the whole manuscript (specially, 2021).
3. The authors should investigate the whole manuscript and avoid any syntax errors and grammatical errors. In my opinion, English needs revision specially in Experimental section.
4. The results showed that the selectivity order of metal ion adsorption onto the adsorbent was Pb(II)>Zn(II). What are your reasons? This can be explained by the covalent index and free energy of hydration (these parameters are very important). The following article can be used "Sep. Sci. Technol. (2020): 55 (11), 1994-2011".
5. The authors should explain about associative or dissociative mechanism. These mechanisms are corresponded to the delta S values. The mentioned reference can be applied.
6. The binary-component adsorption isotherms are normally attained by extending the single component isotherm models such as non-modified Langmuir binary component isotherm, the modified Langmuir binary-component isotherm, the extended Freundlich binary-component isotherm, the Sheindorf-Rebuhn-Sheintuch isotherm etc. Thus, the isotherm models in bi-component system should be revised and rephrased. The following references can be useful: J. Colloid Interface Sci., 79 (1981) 136-142.
7. The double-exponential kinetic model should be investigated. This model shows that the adsorption rate is mostly related to two stages: (1) a rapid step with transporting ions from the bulk to the adsorbent external surface and (2) the slow step with the diffusion of mentioned ions into the adsorbent interior surface. Please use appropriate references.
Editor's comment
Dear authors, Thank you for submitting your manuscript for publication in ESPR. It has been examined by expert reviewers who have concluded that the work is of potential interest to the readers of ESPR. However, as indicated in the enclosed comments, very major revision is suggested. I will be pleased to consider for publication a revised manuscript that addresses the reviewers' concerns
The Freundlich unit is wrong kF is the Freundlich constant (mg g–1)(mg L–1)–1/nF and 1/nF is the heterogeneity factor.
Linearization:
Please do not use the linearization of the equations. Nowadays, most computer programs can perform non-linear regression and should be used in preference of linearization to determine adsorption parameters
Do not linearize the equations.
Use nonlinear estimation in the kinetic models;
Use nonlinear estimation in the equilibrium models;
Use nonlinear estimation in all fits and plot.
Please provide the fitting of the best model in the isotherms and kinetic figures
- The equation of RL makes no sense in the manuscript, since, RL will always be lower than 1. The only possibility of RL being > 1 if KL or Co be negative. Considering that there is no negative concentration and no negative equilibrium constant, RL will always be < 1, if the Langmuir isotherm model is fitted. Based on that, I request you to remove this from the manuscript. I perfectly know that there are a lot of mistakes similar yours spread entirely in the literature.
- If there are any questions, please read the following articles:DOI: 10.1016/J.JECE.2019.103396
این پروژه شامل 1 فایل مهم است، لطفا قبل از ارسال پیشنهاد حتما نسبت به بررسی این فایل اقدام فرمایید.
مهارت ها و تخصص های مورد نیاز
مهلت برای انجام
10روز
وضعیت مناقصه
بسته
درباره کارفرما
عضویت سیزده سال پیش
نیاز به استخدام فریلنسر یا سفارش پروژه مشابه دارید؟
قادر به انجام این پروژه هستید؟
متأسفانه مهلت ارسال پیشنهاد این پروژه به پایان رسیده و پروژه بسته شده است؛ اما فرصتهای متعددی در سایت موجود میباشد.
پروژه کار با نرم افزار Microsoft robotic developer studio (6427)
شش سال پیش منتشر شده
به رایگان یک حساب کاربری بسازید
مهارتها و تخصصهای خود را ثبت کنید، رزومه و نمونهکارهای خود را نشان دهید و سوابق کاری خود را شرح دهید.
به شیوهای که دوست دارید کار کنید
برای پروژههای دلخواه در زمان دلخواه پیشنهاد قیمت خود را ثبت کنید و به فرصتهای شغلی منحصر به فرد دسترسی پیدا کنید.
با اطمینان دستمزد دریافت کنید
از زمان شروع کار تا انتهای کار به امنیت مالی شما کمک خواهیم کرد. وجه پروژه را از ابتدای کار به امانت در سایت نگه خواهیم داشت تا تضمین شودکه بعد از تحویل کار دستمزد شما پرداخت خواهد شد.
میخواهید شروع به کار کنید؟
یک حساب کاربری بسازید
بهترین مشاغل فریلنسری را پیدا کنید
رشد شغلی شما به راحتی ایجاد یک حساب کاربری رایگان و یافتن کار (پروژه) متناسب با مهارتهای شما
است.
پیدا کردن کار (پروژه)
تماشای دمو روش کار